Setting Printer Static Ip Address - AMT Datasouth Documax 6390 User Manual

24-pin dot matrix printer

Hide thumbs Also See for Documax 6390:

Table of Contents

Search results:

Model: Documax 6390

Should the printer not be found during the search, check to see if the

network firewall is blocking the search results. Temporally disable the

firewall and restart the NetFinder search.

In order to search and set the printer's IP address conveniently for the

first time, the factory default setting is DHCP mode which assigns the IP

address dynamically. If there is no DHCP server in the connected LAN

and the printer is set to DHCP mode as well, then it will use the internal

pre-set address (IP: 10.0.0.1, Subnet Mask: 255.255.255.0)

automatically.

Setting printer static IP address

Run NetFinder search. Refer to above "NetFinder Search" section for

instructions.

It is suggested that printer's IP is set to static in actual usage, which can

cut down the time when initializing the Ethernet interface as the printer is

turned on and prevent IP conflicts. The network segment part of the IP

address and Subnet Mask must be the same as those of the PC

connecting with a printer. It is not restricted for NetFinder to search

printers in the same network but different segment parts.

IP Address: 192.168.0.240 [Dynamic]

MAC Address: 20-2C-B7-00-3F-03

- 29 -

Table of Contents