Table of Contents
Advertisement
Top of form (control panel setting)
The top of form setting determines the margin between the top of paper and
the first printed line (the top margin). The top of the first printed line is the
zero position.
TOF ADJUSTMENT ~
1.
Load paper. When the printer is in online mode, press LF/FF key for 3
seconds, the printer's Online LED blinks, which means the printer is in
TOF adjustment mode.
❖
Press "LOAD/EJECT" key one time, moves paper forward 1/60
inch.
❖
Press "LF/FF" key one time moves paper reverse 1/60 inch.
After adjustment, press ONLINE key, the Online LED blinks twice and
the printer makes 2 beeps. The Online LED is ON. The printer saves the
new setting and exits TOP adjustment mode.
TOF position can be viewed or adjusted using the print driver
"Printer
settings". Select
Form" to view current setting. Select new setting or "Default",
Dark
and then click "Set" to save new setting. Advancing the paper is a
positive value, reversing the paper is a negative value. Refer to
Settings via Driver
"Tof Cut
Sheets", or
section of the manual for procedure details.
- 17 -
"Tof
Continuous", or
"Tof
Printer
Advertisement
Table of Contents
