Detailed Parameter Setting Range - AMT Datasouth Fastmark Z5DT Series User Manual

Repeat step 1-3 to change other parameters of the serial port.
4)
Save the modified parameters. Switch the menu to "SAVE ALL" option and press the button for a long time
5)
to save the modified parameters. The printer will restart automatically after the saving to validate the
parameter changes. (Remarks: if "SAVE ALL" option is not executed, the printer will not save the setting and
will execute the previous configuration parameters when powered on next time).
If you want to discard your changes, choose "EXIT" directly to exit.
6)
Configuring other parameters is similar to the process described above, which can be operated according
to the menu prompts.

3.3.2 Detailed parameter setting range

Adjustment object
Media type
Media out mode
Print darkness
Print speed (unit: IPS)
Vertical position adjustment (unit:
dots)
Horizontal position adjustment
(unit: dots)
Tear-off position adjustment (unit:
dots)
Time
Date
1.BAUDRATE
115200
Figure 3.3.1-4 submenu of serial baud rate
Setting range
CONTINUOUS
MARK
WEB
REWIND
TEAR OFF
PEEL OFF
CUTTER
00—30
3-6
-120-+120
-9999-+9999
-120-+120
00-23
00-59
00-99
01-12
01-31
- 11 -
Remarks
CONTINUOUS: continuous label/paper
MARK: marked label/paper
WEB: label paper, please see Appendix 1.2
technical specifications of paper for details.
The peel off module and cutter are optional.
Set the print darkness as low as possible on
condition that the print effect is acceptable so as
to ensure the lifetime of print head.
For adjustment effect, please refer to 3.5 Print
position adjustment.
Supported display format：
MM/DD/YY 24HR
MM/DD/YY 12HR
DD/MM/YY 24HR
DD/MM/YY 12HR
Z5 User's Guide
DT