Table of Contents
Advertisement
Save Meas. Data
Save Meas. Data
Average measurement results data and data measured using remote measurement or
trigger measurement through the PC application can be saved to the PC.
Notes
For this setting, make sure to copy the PC application to the PC's hard
drive before running the application.
1
Under "Save Meas. Data" in the [Measure] tab, click
PC.
The "Browse For Folder" window will appear.
2
Select the save destination and Click [OK].
Measurements performed remotely or using triggers will be collected and saved
as a .csv fi le in the folder specifi ed as the save destination.
Save destination folder: Specifi ed folder – "Serial No" folder
― yyyymmdd (measurement date) folder
File name:
<Example> 132648.csv (measurement hhmmss)
Memo
To change the save destination, click the [
Folder" window.
[When saving averages to the PC]
3
Click the [Avg. Meas.] tab.
The screen will switch to the average display, and the displayed averages will be
saved to the destination selected in 2.
File name:
<Example> 132648_A.csv (measurement hhmmss)
to the left of
] mark to open the "Browse For
3
2
1
60
Advertisement
Table of Contents
