Konica Minolta CR-20 Instruction Manual page 45

Points to Remember
[Measure] Tab
Measurement can be performed when the instrument settings are met and the PC application is running.
Memo The settings confi gured on the PC application will also be applied when measuring remotely from the PC application.
When performing remote measurement from the PC application, the "Meas. Cond." on the left side of the screen will be applied.
Mask
Confi gures the target mask for the
instrument. (Page 48)
Avg. Meas.
Switching to this tab will display the
average for successively measured
data.
Use Measure Button on Inst.
Checking the box on the right enables
measurement through the measuring
button on the instrument.
Memo The "Measure" key on the PC
application is disabled.
(Cont.)
Avg. Reset
This function resets the successively measured
data used for determining the average.
Undo
This function allows measurement to be redone
during averaging measurements.
Save Meas. Data
Specifi es the destination for saving
data measured using the PC
application. It is also possible to
confi gure the settings so that
measured data is not saved.
Latest Meas.
Displays the most recent measurement
data.
Measure
Measures remotely from the PC
application.
45