Avg. Meas - Konica Minolta CR-20 Instruction Manual

Measurement

Avg. Meas.

Using the average measurement function when measuring makes it possible to obtain
data that is even more accurate.
If the sample color is uneven, the accuracy of the measurement can be improved by
randomly measuring locations within the sample area to calculate the average for the
sample, or by repeatedly measuring the same sample location to calculate the average
for that location.
Notes After an average is determined for the instrument, because the average is
converted for each color space and displayed, the simple averages for
measurements of each count may not match.
1
Measure repeatedly until the desired measurement count is
reached.
Memo To perform the measurement again during average measurement, click "
Undo".
2
Switch from the [Latest Meas.] tab to the [Avg. Meas.] tab.
The statistical calculation results for measurements up to the number of
measurements performed will be displayed.
3
Reset the average.
Click "Avg. Reset".
Continuing with measurement will switch the display to the [Latest Meas.] tab
and the measurement results will be displayed.
(Cont.)
2 1
3
59