Canon TC-20 Online Manual page 189

7. 7. Load rolls on the roll holder.
1. 1. Make sure that the lock levers on the left and right roll holders are toward
2. 2. Align the roll paper winding direction as shown in the figure, insert the roll holder marked with [R]
from the right, and press it firmly until the side of the roll paper (A) sits flush against the roll holder
without any gap.
Insert the roll holder marked with [R] so that it is on the right side.
Caution
• • Do not touch the metal part inside the roll holder when setting the roll holder. The sharp
edges of the metal may cause injury.
189
and unlocked.