The Back Side Of The Paper Is Dirty - Canon TC-20 Online Manual

The back side of the paper is dirty

Was the previous print job printed on small paper?
Check 1
Open the left and right access covers, and clean the platen.
Cleaning Inside the Printer
Is Detect paper width in the touch screen menu set to Disable?
Check 2
Printing with Detect paper width set to Disable may cause the platen to be dirtied.
Set Detect paper width in the touch screen menu to Enable, and then open the left and right access covers,
and clean the platen.
Cleaning Inside the Printer
Does this paper take longer to dry?
Check 3
Increase the length of the Pause between pages and Pause between scans settings from the touch screen
menu.
Specifying the Ink Drying Time
Note
• When printing on paper that takes longer to dry, the paper may curl during printing and come in contact •
with the output tray.
In such situations, set an Ink drying wait time and an Ink drying target area for Pause between scans
in the touch screen menu.
However, note that printing will now take longer.
Menu Structure
• • If the platen is dirty, open the left and right access covers, and clean the platen.
443