Setting Administrator Password On Operation Panel - Canon TC-20 Online Manual

Setting Administrator Password on Operation Panel

The administrator password can be set or canceled.
Important
• • The administrator password is set at time of purchase. The default password is the printer serial
number (9 characters) which can be found on the sticker on the printer.
1. 1. Select
Home Screen Menu Composition
2. 2. Select Printer settings.
3. Select Administrator password settings. 3.
f you have set an administrator password, enter the password.
4. Select Change administrator password. 4.
5. 5. Select the effective range of the administrator password.
Remote UI and other tools
To change the setting using the remote UI or a certain software, the administrator password needs
to be entered.
LCD, Remote UI, and other tools
To change the setting using the operation panel of this printer, remote UI or a certain software, the
administrator password needs to be entered.
6. Enter new administrator password. 6.
Important
• • When changing the password, the character is limited as follows.
Set the password using 4 to 32 characters.
Only alphanumeric characters are available.
From a security point of view, it is recommended to set the password of 8 characters or more
in combination of alphanumeric characters.
7. 7. Select Apply.
8. Enter the administrator password again. 8.
9. 9. Select Apply.
(Setup) on the HOME screen.
267