Securing The Machine With A Safety Strap; Machine State Indication - JEI Minibeast Cordless Operator's Manual

4.8. Securing the machine with a safety strap

Always secure the machine with a safety strap!
It prevents the machine from falling if it loses the clamping.
Attach the machine to a stable structure by putting the strap through the hole in the
machine body. Make sure that the strap is tight and not twisted. If the machine
detaches from the workpiece and hangs on the strap, replace the strap. Do not put the
strap into the buckle from the front.
Vertical drilling
CORRECT

4.9. Machine state indication

There is an LED indicator on the control panel that shows state of the machine.
LED indication
Green is on
Green flashes
Red is on
Red flashes
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions is prohibited.
✓
Machine state
Sufficient clamping force
Low clamping force
Discharged battery
Motor overload or clamping loss
This document is protected by copyrights.
15
Minibeast Cordless
Inverted drilling
INCORRECT
Machine performance
–
High risk of losing clamping
Motor stops,
after a time of up to 15 minutes the
electromagnetic base turns off
Motor stops