Table of Contents
Advertisement
1. GENERAL INFORMATION
1.1. Application
The Minibeast Cordless is a drilling machine designed to drill holes of diameters up to
36 mm (1.42") with TCT annular cutters and up to 30 mm (1.18") with HSS annular
cutters. The machine can also drill holes of diameters up to 12 mm (0.47") by using
twist drill bits. It allows machining holes of diameters up to 30 mm (1.18") by using
conical countersinks.
The drilling machine is battery powered. After charging the battery, it can work in
places that are not connected to the mains.
The electromagnetic base clamps the machine to ferromagnetic surfaces. This
assures that the operator is safe and the machine works correctly. A safety strap
protects the machine from falling in case of a clamping loss.
1.2. Technical data
Spindle shank
Maximum drilling diameter with TCT annular cutter
Maximum drilling diameter with HSS annular cutter
Maximum drilling diameter with a twist drill bit
Maximum diameter of a hole to be machined with a conical
countersink
Maximum drilling depth
Stroke
Minimum workpiece thickness
Electromagnetic base dimensions
Clamping force
(surface with the thickness of 25 mm and roughness R
Voltage
Power
Protection level IP
Rotational speed with load
Required ambient temperature
Weight with battery 4 Ah
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions is prohibited.
= 1.25)
a
This document is protected by copyrights.
3
Minibeast Cordless
"
19 mm (3/4
) Weldon
36 mm (1.42")
"
30 mm (1.18
)
"
12 mm (0.47
)
"
30 mm (1.18
)
"
50 mm (1.97
)
"
70 mm (2.76
)
"
6 mm (0.24
)
80 mm × 160 mm × 38 mm
"
"
"
(3.15
× 6.3
× 1.5
)
7500 N
18 V DC
450 W
IP20
260 rpm
0 – 40 ⁰C (32 – 104 ⁰F)
11.5 kg (25.35 lbs)
Advertisement
Table of Contents
