Table of Contents
Advertisement
WWW.JEIUK.COM
2. SAFETY PRECAUTIONS
1. Before beginning, read this Operator's Manual and complete proper occupational safety
and health training.
2. The machine must be used only in applications specified in this Operator's Manual.
3. The machine must be complete and all parts must be genuine and fully operational.
4. The electrical supply specifications must conform to those specified on the rating plate.
5. The machine must be plugged into a properly grounded (earthed) socket-outlet. The
electrical supply must be protected with a 16 A fuse for 230 V or a 32 A fuse for 115 V.
When used on building sites, supply the machine through an isolation transformer made in
II protection class.
6. Never carry the machine by the cord or pull it to disconnect the plug from the power
outlet as this may damage the power cord and result in electric shock.
7. Transport and position the machine using the carrying handle, with the magnet switch set
to position 'O'.
8. Untrained bystanders must not be present in the vicinity of the machine.
9. Before beginning, check the condition of the machine and electrical supply,
including the power cord, plug, control panel components, and cutters.
10. Keep the machine dry. Exposure to rain, snow, or frost is prohibited.
11. Never stay below the machine placed at heights.
12. Keep the work area well lit, clean, and free of obstacles.
13. Mount the annular cutter securely using the set screws. Remove adjusting keys and
wrenches from the work area before connecting the plug to the power outlet.
14. Never use dull or damaged cutters.
15. Mount and dismount cutters using protective gloves and with the power cord
unplugged from the power outlet.
16. Never use annular cutters without the pilot pin except for establishing incomplete
through holes.
17. Mount only annular cutters with the maximum drilling diameter of 36 mm (1.42'') and
the maximum drilling depth of 55 mm (2.17'').
18. Never use the machine in the vicinity of flammable fluids or gases, or in explosive
environments.
6
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
This document is protected by copyrights.
Advertisement
Table of Contents
