Blackmagicdesign ATEM Microphone Converter Installation And Operation Manual page 3

English
Welcome
Thank you for purchasing ATEM Microphone Converter!
ATEM Microphone Converter is an extremely high quality analog to digital audio
converter for multiple microphone sources.
The combined XLR/TRS inputs allow XLR or jack cables to be connected,
embedding the 4 analog inputs as MADI channels 1, 2, 3 and 4. The MADI input
allows multiple ATEM Microphone Converters to be daisy chained so more than
4 channels of audio can be embedded into a single MADI connection!
Your converter features ultra high dynamic range input conversion so you get an
extremely low noise floor of -129dBV and all mic level sources can be individually
adjusted using a discrete digital preamplifier. Phantom power and mic or line audio
input levels can be set using the small built in switches, plus the HDMI monitoring
output lets you visually see waveforms, audio levels and settings for each source.
This instruction manual shows you how to get started with your ATEM
Microphone Converter.
Check the support page on our website at www.blackmagicdesign.com for the
latest version of this manual and for updates to your ATEM Microphone Converter's
internal software. When downloading the software, be sure to register with your
information so we can keep you updated when new software is released. We are
continually working on new features and improvements, so we are keen to
hear from you!
Grant Petty
CEO Blackmagic Design