Insert The Gobo Holder (Profile Lens Barrels Only); Mounting & Rigging - Blizzard Lighting Node:b RGBAL Manual

Insert the Gobo Holder (Profile Lens Barrels Only)

1.) Remove the profile lens barrel, align the gobo holder with the barrel slots.
2.) Insert the gobo holder into the slot, and turn counterclockwise to secure.
3.) Align the V-shape on the holder with the marked spot on the lens barrel.
Mounting & Rigging
This fixture may be mounted in any SAFE position provided there is enough
room for ventilation. The fan or vent pathway must never be obstructed.
Mount the fixture using a suitable "C" or "O" type clamp. The clamp should be
rated to hold at least 10x the fixture's weight to ensure structural stability. Do
not mount to surfaces of unknown strength, and ensure properly rated rigging
is used when mounting fixtures overhead.
node:b™ RGBAL Manual Rev. A
Gobo
Holder
Inner:
Ø 24 mm
IMPORTANT: Regardless of the
rigging option you choose for
your fixtures, always be sure to
secure your fixture with a safety
cable.
Page 9
0.4 mm
Outer:
Ø 79.4 mm Ø 68.6 mm
© 2022 Blizzard Lighting, LLC
thick