Connecting The Power Cord - H3C WX2880X Installation Manual

Figure2-14 Connecting an optical fiber

Connecting the power cord

WARNING!
To avoid bodily injury, first connect the power cord to the device, and then connect the power cord to
the power source in the equipment room.
CAUTION:
Before connecting the power cord, make sure the device is grounded correctly.
To connect the power cord:
1. Connect one end of the AC power cord to the AC-input power receptacle on the device.
2. Connect the other end of the AC power cord to the AC power source.
Figure2-15 Connecting the power cord
2-13