Connecting The Power Cord; Connecting The Power Adapter For The Wx1804H-Pwr/Wx1820H Access Controller - H3C WX1800H Series Installation Manual

Figure 14 Connecting the device to the network

Connecting the power cord

CAUTION:
Before connecting the power cord, make sure the local AC power source is reliably grounded.
Connecting the power adapter for the
WX1804H-PWR/WX1820H access controller
If you use the local power source for the WX1804H-PWR/WX1820H access controller, use a power
adapter to connect the device to the power source.
To connect the power adapter for the WX1804H-PWR/WX1820H access controller:
Make sure the device is reliably grounded.
1.
Connect the power adapter to the DC power receptacle on the front panel of the device.
2.
Connect the power adapter to the power source.
3.
Observe the LEDs on the device to verify that the power adapter is connected correctly. For
4.
information about LEDs, see
Figure 15 Connecting the power adapter for the WX1804H-PWR/WX1820H access controller
"Appendix A Chassis views and technical
13
specifications."