Connecting The Power Adapter; Verifying The Installation - H3C WX2510H Installation Manual

Figure 5 Connecting the device to the network

Connecting the power adapter

Make sure the device is reliably grounded.
1.
Connect the power adapter to the external power source.
2.
Connect the DC power plug of the power adapter to the DC power receptacle on the front panel
3.
of the device.
Figure 6 Connecting the power adapter

Verifying the installation

Before powering on the device, verify the following information:
•
Enough clearance is reserved around the device for heat dissipation.
•
The power source has the specifications required by the device.
8