Hardware Management And Maintenance; Displaying Hardware Information About The Device; Displaying Software And Hardware Version Information About The Device; Displaying The Operational Statistics About The Device - H3C WX2880X Installation Manual

4
Hardware management and
maintenance
The command lines and outputs depend on the software version that runs on the device.

Displaying hardware information about the device

Displaying software and hardware version information about
the device
Use the
display version
the device. The output includes the following information:
•
Current software version.
•
Current hardware version.
•
Device operating time.
The output depends on the software and hardware version of the device.
<H3C> display version
H3C Comware Software, Version 7.1.064, ESS 5610
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.
H3C WX2880X uptime is 4 weeks, 0 days, 0 hours, 46 minutes
Last reboot reason : User soft reboot
Boot image: flash:/boot.bin
Boot image version: 7.1.064, ESS 5610
Compiled May 20 2022 15:00:00
System image: flash:/system.bin
System image version: 7.1.064, ESS 5610
Compiled May 20 2022 15:00:00
with 1 2200MHz Multi-core Processor
4096M bytes DDR4
7456M bytes EMMC Memory
Hardware Version is Ver.A
CPLD Version is 002
Basic Bootrom Version is 1.08
Extend Bootrom Version is 1.08
[Subslot 0]WX2880X Hardware Version is Ver.A

Displaying the operational statistics about the device

When you perform routine maintenance or the system fails, you might need to display the
operational information of each feature module to locate failures. Typically, you need to run the
command to display software and hardware version information about
4-1