Dry Contact Connection - Delta M100 210 Operation And Installation Manual

Grid-tie transformerless solar inverter
Hide thumbs Also See for M100 210:
Table of Contents

Advertisement

Installation

3.7.3 Dry Contact Connection

M100
provides a dry control contact pair that may be used to control external
_210
devices based on the status of operation of the inverter.
The terminal block for this function is shown in Figure 3-27. The terminals
marked in the figure identify the dry contact connection. The operation of the dry
contact is normally open. The functionality of this contact can be customized by
users via settings available in APP or DSS.
Dry Contact B
Dry Contact A
Figure 3-27: Dry Contact connection
46

Advertisement

Chapters

Table of Contents
loading

Table of Contents