Output Setting - RGBlink Q2 Quick Start Manual

H.264 IP Settings
Q2 series support to preview image.
When there is H.264 input module installed on Q2,
which is able to search and take the video signal from
webcam in the same local network.
To make sure H.264 module take effect, IP setting is
required. IP of H.264 should in the same network
section, for example:network IP is 168.192.0.1, IP of
H.264 shall be 168.192.0.X (X≠1)

Output Setting

Resolution:
Click any output port, the board where the port locates
is selected. Users can do settings to the port now.
A red rectangle flashes around the chosen port when it
is clicked.
Standard Resolutions can be chosen as shown in the right
figure.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
14 / 30