Table of Contents
Advertisement
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is
preattached. Extra parts may be included.
#8 x 3/4 "
#8 x 3/8 "
M8 Star Washer
Screw (29)–16
Screw (6)–2
3/8" x 3/4"
(7)–2
Screw (3)–2
3/8" x 2 1/4" Screw (1)–2
M8 x 50mm Screw (2)–4
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cadence Compact 500 and is the answer not in the manual?
Questions and answers
My cc500 treadmill is squeaking. Do I need to lubricate it and where?
The Pro-Form Cadence Compact 500 treadmill has a walking belt coated with high-performance lubricant. The manual explicitly states not to apply silicone spray or other substances to the walking belt or walking platform unless instructed by an authorized service representative. If the treadmill is squeaking, lubrication should not be applied unless advised by the manufacturer. Instead, check for other possible causes, such as loose parts or misalignment.
This answer is automatically generated
how do you know how many miles are on the machine?
To check the mileage on a Pro-Form Cadence Compact 500, look at the display and find the "Distance" reading, which shows how far you have walked or run in miles or kilometers. If needed, you can change the unit of measurement by pressing the "St/M" button.
This answer is automatically generated