Pro-Form Cadence Compact 500 User Manual page 11

Table of Contents

Advertisement

9. Orient the Storage Latch (79) as shown. Attach
the Storage Latch to the Left Upright (80) with
two #8 x 3/4" Screws (29); start both Screws,
and then tighten them.
10. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see
pages 22 and 23). Note: Extra parts may be included.
9
29
79
11
80

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cadence Compact 500 and is the answer not in the manual?

Questions and answers

Elizabeth Alford
February 23, 2025

My cc500 treadmill is squeaking. Do I need to lubricate it and where?

1 comments:
Mr. Anderson
February 23, 2025

The Pro-Form Cadence Compact 500 treadmill has a walking belt coated with high-performance lubricant. The manual explicitly states not to apply silicone spray or other substances to the walking belt or walking platform unless instructed by an authorized service representative. If the treadmill is squeaking, lubrication should not be applied unless advised by the manufacturer. Instead, check for other possible causes, such as loose parts or misalignment.

This answer is automatically generated

Sharla
February 28, 2025

how do you know how many miles are on the machine?

1 comments:
Mr. Anderson
February 28, 2025

To check the mileage on a Pro-Form Cadence Compact 500, look at the display and find the "Distance" reading, which shows how far you have walked or run in miles or kilometers. If needed, you can change the unit of measurement by pressing the "St/M" button.

This answer is automatically generated

This manual is also suitable for:

Cc500Pftl39621-int.0

Table of Contents

Save PDF