Table of Contents
Advertisement
BEFORE YOU BEGIN
Thank you for selecting the new PROFORM
treadmill. The CC500 treadmill offers a selection of fea-
tures designed to make your workouts at home more
effective. And when you're not exercising, the tread-
mill can be folded up, requiring less than half the floor
space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after
Handrail
Storage Latch
Walking Belt
Foot Rail
Idler Roller Screws
CC500
reading this manual, please see the front cover of this
®
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
5
Console
Accessory Tray
Key/Clip
Motor Hood
Power Switch
Wheel
Platform Cushion
Length: 5 ft. 5 in. (165 cm)
Width: 2 ft. 5 in. (75 cm)
Weight: 132 lbs. (60 kg)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cadence Compact 500 and is the answer not in the manual?
Questions and answers
My cc500 treadmill is squeaking. Do I need to lubricate it and where?
The Pro-Form Cadence Compact 500 treadmill has a walking belt coated with high-performance lubricant. The manual explicitly states not to apply silicone spray or other substances to the walking belt or walking platform unless instructed by an authorized service representative. If the treadmill is squeaking, lubrication should not be applied unless advised by the manufacturer. Instead, check for other possible causes, such as loose parts or misalignment.
This answer is automatically generated
how do you know how many miles are on the machine?
To check the mileage on a Pro-Form Cadence Compact 500, look at the display and find the "Distance" reading, which shows how far you have walked or run in miles or kilometers. If needed, you can change the unit of measurement by pressing the "St/M" button.
This answer is automatically generated