Mitsubishi MELSEC AJ65BT-R2 User Manual page 183

Rs-232c interface module type
Hide thumbs Also See for MELSEC AJ65BT-R2:
Table of Contents

Advertisement

8 OTHER FUNCTIONS
(3) Precautions for using ASCII-BIN conversion transmission/reception
function
(a) The data codes 30
handled as the transmission/reception data in the conversion target range.
(b) If ASCII-BIN conversion is designated for frame transmission or monitor
transmission, only the transmission data section (contents of transmission
area) is converted into ASCII data.
The registration frame (head frame/end frame when transmitting with
transmission frame 1 area) is not converted into ASCII data.
(c) If ASCII-BIN conversion is designated for the frame reception, only the
reception data section (contents stored in the reception area) is converted
into binary data.
The reception head frame/end frame are compared with the reception data
as the registered data.
(d) If ASCII-BIN conversion is designated for the non-procedural transmission
or monitor transmission function, and the size of the binary data before
conversion exceeds 4096 bytes, the "transmission data size error (BB93
will occur.
(e) If ASCII-BIN conversion is designated for frame transmission/reception
function, and the byte size of the data including the transmission/reception
data after ASCII-BIN conversion, the head frame and end frame exceeds
4096 bytes, the following errors will occur.
When transmitting: Transmission data size error (BB93
When receiving: Reception data size over error (BBA2
(4) Setting the buffer memory
When carrying out ASCII-BIN conversion, designate the R2 buffer memory
shown below.
R2 buffer
memory
Name
address
ASCII-BIN
103
R 2
conversion
H
designation
POINT
When the above buffer memory setting values have been changed, initialize the R2
with the process given in section 8.6.
to 39
("0" to "9") and 41
H
H
Designate whether to carry out ASCII-BIN conversion to
transmit/receive data as ASCII codes when exchanging data with
the external device.
0 : Do not carry out ASCII-BIN conversion. (Default value)
1 : Carry out ASCII-BIN conversion.
8 - 11
MELSEC-A
to 46
("A" to "F") data is
H
H
)
H
)
H
Details
)"
H

Advertisement

Table of Contents
loading

Table of Contents