Mitsubishi MELSEC AJ65BT-R2 User Manual page 81

5 PRELIMINARY INFORMATION
2) Transmission
Master station
Transmit after R2
detects monitor
condition establishment!
(g) Monitor transmission area (
This area is used to store the data transmitted from the external device
using the monitor transmission function, from the master station to R2.
When not using the monitor transmission function, the transmission size
( R 2 2C
H
The default transmission size is 200
reduced by setting it according to the No. of words being used.
1) Update timing (Update direction: Master station to R2)
The master station data is stored in the R2 buffer memory at the
following timing.
•
Just after the conditions are established in the monitor transmission
function.
1) Monitor conditions
established!
data
R2
, R 2 30 ) can be set to "0".
H
3) Transmission
data
External device, such as ID controller
5 - 23
,
R 2 2C to 2F R 2 30
H H
, so the transmission size can be
H
MELSEC-A
)
to 33
H H