BladderScan
BVI 9400
®
ScanPoint
Screen Buttons
®
Button
Sleep Mode
The Sleep mode helps preserve battery power. After four minutes of idle time, a Sleep mode
alert message displays for 15 seconds (Figure 25). While the message is displayed, press
any button to keep the console awake and dismiss the message. After 15 seconds, the
console goes to sleep. To wake the instrument from sleep, simply press the Power button.
Figure 25. Sleep Mode Screen
Memory Optimization During Power Down
When the power is turned off, the BVI 9400 begins an internal process of memory
optimization. This process takes several seconds. When complete, the device will shut down.
An alert appears on the display during the memory optimization process (Figure 26).
Figure 26. Memory Optimization Alert
User's Manual
Function
No function.
CANCEL: Cancels the current action and ends communication with ScanPoint
No function.
Displays, Controls and Indicators
NOTE:
DO NOT replace the
battery until the device shuts
down completely. Replacing
the battery while memory is
being optimized might disable
the instrument as program and
exam files might not be rewritten
properly.
.
®
page 44