Introduction; Content Of This Document; Safety Information; Designated Use - Pepperl+Fuchs VU120 Brief Instructions

LED Module VU120

Introduction

1 Introduction
1.1

Content of this Document

This document contains information that you need for the mounting and dismounting
of the LED module.
Note
See manual for further information.
Note
This document does not substitute the instruction manual.
Note
For full information on the product, refer to the instruction manual and further documentation
on the Internet at www.pepperl-fuchs.com.
Note
For specific device information such as the year of construction, scan the QR code
on the device. As an alternative, enter the serial number in the serial number search
at www.pepperl-fuchs.com.
1.2

Safety Information

Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance,
and dismounting lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation,
commissioning, operation, maintenance, and dismounting of the product. The personnel must
have read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
1.3

Designated Use

Device for status signaling
Suitable for the following device versions: Vibration limit switch LVL-M4
5