LED Module VU120 Introduction Introduction Content of this Document This document contains information that you need for the mounting and dismounting of the LED module. Note See manual for further information. Note This document does not substitute the instruction manual.
LED Module VU120 Introduction Symbols Used This document contains symbols of informative messages. 1.4.1 Informative Symbols Note This symbol brings important information to your attention. 1.4.2 Symbols in Graphics 1, 2, 3 ... Item numbers A, B, C, ... Views...
• Do not connect in explosive atmospheres. • Only connect to Pepperl+Fuchs service devices. • Observe the instructions for transporting and returning the device outlined in the manual. Note In case of questions, please context the local Pepperl+Fuchs service organization.
LED Module VU120 Mounting and Dismounting of the Module Mounting and Dismounting of the Module Required Tools • 3 mm allen key for screw of cover locking • Crimper • Side cutter • Size 1 flat-blade screwdriver Removing the LED Module Cover locking: optional 1 →...
LED Module VU120 Mounting and Dismounting of the Module Mounting the LED Module Mounting is performed by following the removal procedure in reverse order. Ensure that the module is snapped in place. 1 → Figure 3.3...
WEEE as unsorted municipal waste. Do not dispose of products bearing this marking as unsorted municipal waste. Instead, return them to Pepperl+Fuchs for disposal under the applicable conditions.