Conformance - Phoenix Contact TC MOBILE I/O X200 User Manual

TC MOBILE I/O...
Approvals

Conformance

ATEX
Please follow the special installation instructions in the
documentation.
FCC
Standards/regulations
Compliance with standard EN50121-4 is achieved under the following operating conditions.
For installations within the 3 m area and safety-related devices, there are additional requirements specified by
EN 50121-4, table 1, note 1. This area is excluded from the manufacturer's declaration.
Section 1, Paragraph 3 of EN 50121-4 shall apply. Use power supplies from the Phoenix Contact QUINT prod-
uct range directly on the device.
R&TTE Directive 1999/5/EC
EMC - immunity to interference (electromagnetic compat-
ibility of wireless systems)
Safety - protection of personnel with regard to electrical
safety
Health - limitation of exposure of the population to electro-
magnetic fields
Radio - effective use of the frequency spectrum and avoid-
ance of radio interference
Noise emission according to EN 61000-6-4
Radio interference voltage, emitted radio interference ac-
cording to EN 55011
52
PHOENIX CONTACT
5.5 Conformance
CE-compliant

II 3 G Ex nA nC IIC T4 Gc X
Part 15.107(a), 15.109(a)
(see "FCC approval" on page 55)
EN 50360
EN 50121-4
EN 61000-6-2, generic standard for the industrial sector
EN 60950
Official Journal of the European Communities 1999/519/EG,
Recommendation of the Council of the European Community
of 12th July 1999
DIN EN 301511
Class B, industrial and residential applications
107812_en_00