107812_en_00
2.7
Removal
WARNING: Risk of electric shock
Only mount or remove the device when disconnected from the voltage.
2.7.1
DIN rail
•
Push the locking pin downwards with a screwdriver and pull out the base latch.
•
Pull the device away from the DIN rail.
Figure 2-10
Removal from the DIN rail
2.7.2
Wall
•
Remove screws.
•
Push the base latch inwards.
Figure 2-11
Removal from the wall
A1
A2
A1
PHOENIX CONTACT
Installation
21