Detecting And Removing Errors; Initial Installation Does Not Start Automatically (Windows ) - Phoenix Contact TC MOBILE I/O X200 User Manual

Remote monitoring via mobile network
Hide thumbs Also See for TC MOBILE I/O X200:
Table of Contents

Advertisement

4

Detecting and removing errors

107812_en_00
4.1
Initial installation does not start automatically
(Windows
Driver installation is not necessary with Linux and Mac OS
directly with a web browser under the IP-address 169.254.10.1.
4.1.1
Possible case 1
You are using an outdated Windows
Solution 1:
Use a computer with USB interface and one of the following operating systems:
®
Windows XP
®
Windows Vista
®
Windows 7
®
Windows 8
®
Windows 10
4.1.2
Possible case 2
The autostart function is not activated in the operating system.
Solution 2:
Select this virtual drive via "Start, Computer".
Start Setup.exe from the virtual CD drive. The driver for the device will be installed.
Follow the instructions of the installation wizard.
Figure 4-1
Virtual CD drive
®
)
®
operating system or no Windows
Detecting and removing errors
®
. You can access the device
®
operating system.
PHOENIX CONTACT
37

Advertisement

Table of Contents
loading

Table of Contents