Lubricating The Rear Suspension; Checking The Throttle Grip Operation; Checking The Switches, Lights And Signals - Yamaha MBK XMAX 2014 Service Manual

Hide thumbs Also See for MBK XMAX 2014:
Table of Contents

Advertisement

2. Check:
• Cable operation
Rough movement → Lubricate.
Recommended lubricant
Engine oil or a suitable cable lu-
bricant
TIP
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubricating device.
EAS21740

LUBRICATING THE REAR SUSPENSION

Lubricate the pivoting point and metal-to-metal
moving parts of the rear suspension.
Recommended lubricant
Lithium-soap-based grease
EAS1SD1002
CHECKING THE THROTTLE GRIP
OPERATION
1. Check:
• Throttle cables
Damage/deterioration → Replace.
• Throttle cable installation
Incorrect → Reinstall the throttle cables.
Refer to "HANDLEBAR" on page 4-69.
2. Check:
• Throttle grip movement
Rough movement → Lubricate or replace the
defective part(s).
Recommended lubricant
Suitable cable lubricant
TIP
With the engine stopped, turn the throttle grip
slowly and release it. Make sure that the throttle
grip turns smoothly and returns properly when
released.
Repeat this check with the handlebar turned all
the way to the left and right.
3. Check:
• Throttle grip free play "a"
Out of specification → Adjust.
Throttle grip free play
3.0–5.0 mm (0.12–0.20 in)
PERIODIC MAINTENANCE
4. Adjust:
• Throttle grip free play
TIP
Prior to adjusting the throttle grip free play, the
engine idling speed should be adjusted properly.
▼▼▼
▼ ▼▼▼
▼ ▼▼▼
a. Loosen the locknut "1".
b. Turn the adjusting nut "2" in direction "a" or "b"
until the specified throttle grip free play is ob-
tained.
Direction "a"
Throttle grip free play is increased.
Direction "b"
Throttle grip free play is decreased.
c. Tighten the locknut.
EWA1SD1005
WARNING
After adjusting the throttle grip free play,
start the engine and turn the handlebars to
the right and to the left to ensure that this
does not cause the engine idling speed to
change.
▲▲▲
▲ ▲▲▲
▲ ▲▲▲
EAS1SD1013
CHECKING THE SWITCHES, LIGHTS AND
SIGNALS
1. Check that all switches operate and that all
lights come on.
Refer to "INSTRUMENT AND CONTROL
FUNCTIONS" in Owner's manual.
3-24
a
▼ ▼▼▼
▼ ▼▼▼
▼ ▼▼▼
a a a
b
1
▲ ▲▲▲
▲ ▲▲▲
▲ ▲▲▲
▼▼▼
2
▲▲▲

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbk evolis 2014Yp125r 2014Yp125ra 2014

Table of Contents