Iview2 Management Software; Iview2 (Iconfig View); Using Iview2 - Advantech IMC-574I-SFP User Manual

2
5.1 iView Management Software
2
iView is the Advantech management software that features a Graphical User Inter-
face (GUI) and gives network managers the ability to monitor and control manage-
able Advantech products.
2
iView is available in several versions: Windows desktop version, WebServer version
3.0, and can also function as a snap-in module for HP OpenView Network Node
Manager and other third party SNMP management software.
2
iView supports the following platforms: Windows 2000, XP, Vista, 7.
Note!
For assistance in selecting the right version of iView
ating system, please visit the Advantech website or contact Technical
Support.
2
5.1.1 iView (iConfig View)
2
iView (iConfig view) is an in-band utility created by Advantech that is used for SNMP
configuration for Advantech' SNMP manageable devices.
2
iView (iConfig view) allows the following actions:
Set an IP address, subnet mask and default gateway.

Define community strings and SNMP Traps.

2
iView (iConfig view) also includes an authorized IP address system and restricted
access to MIB groups which are supported by Advantech' manageable devices.
These extra layers of security do not affect SNMP compatibility. iView
can upload new versions of the system software and new MIB information. It also
includes diagnostic capabilities for faster resolution of technical support issues.
5.2 Using iView
2
iView is Advantech' management software, providing network management in an
easy to use GUI. Once iView
dows operating system, use the Start menu to access iView
desktop or WebServer version.
Note!
Windows SNMP services must be installed to receive traps.
The autoscan feature of iView
and list them in the network outline. Click the connection for the IMC-574I-SFP to
2
open its iView
view icon on the toolbar in iView
default password/username is admin/admin. Additional private usernames and pass-
words can be entered in the USERS tab. If the list of passwords is not maintained,
2
2
is installed on a network management PC using a Win-
2
will detect Advantech' devices on an active subnet
screen. To perform additional configuration, select the iView
2
. This allows a session to be launched, and the
2
. iView
20 IMC-574I-SFP User Manual
2
for a specific oper-
2
(iConfig view)
2
is available in a
2
iConfig