SECTION 4
SOFTWARE INSTALLATION
3
IN THIS SECTION
Installing the Driver ............................................................
Un-Installing the Driver ......................................................
.
Do not connect the converter to your PC until the Driver is installed. The driver is contained on the CD included
with the converter. It is installed using an executable program. This program must be run on your PC before
connecting the converter to your USB port.
INSTALLING THE DRIVER
Insert the CD into your CD ROM Drive. The driver installation software should automatically start. If not, browse
the CD and double click on the "setup.exe" file. The following dialog box will appear.
1. Click Next. The license agreement dialog box will appear.
Figure 2: Run setup.exe dialog
11
BB-USR604