Connecting The Converter To Ethernet Ports; Rj45 Ethernet Cable Wiring; Figure 2.7 Ethernet Plug & Connector Pin Position - Advantech IMC-574I-SFP User Manual

2.5

Connecting the Converter to Ethernet Ports

2.5.1

RJ45 Ethernet Cable Wiring

The following table lists the pin configuration for the RJ45 data connector.
Pin Signal Name 1000M
1 TXD1+
2 TXD1-
3 RXD2+
4 D3+
5 D3-
6 RXD2-
7 D4+
8 D4-
* The MDI/MDIX function will automatically adjust the direction of these signals to
match the connected unit when running 10/100Base-T. 1000Base-T will use all 4
pairs in full duplex mode.
Figure 2.7 Ethernet Plug & Connector Pin Position
Signal Direction 10/100M
Out*
Out*
In*
In*
8
1
11 IMC-574I-SFP User Manual