Connecting The Converter To Console Port; Figure 2.8 Serial Console Cable - Advantech IMC-574I-SFP User Manual

2.6

Connecting the Converter to Console Port

A console port, located next to the DIP Switch bay, allows the user to use of a local
RS-232 serial interface for management. A mini-jack to DB9F cable is provided with
the product for direct connection to a PC serial port.
Note! To log on through the serial port, set the computer/terminal for VT-100
emulation, with: 38.4K baud, 8 data bits, 1 stop bit, no parity, no
FlowControl.
The IMC-574I-SFP includes an RS-232 mini jack for the console port allowing the
end user to launch a serial session and access a list of commands. The serial port on
the computer/terminal should be set for: 38.4K baud, 8 data bits, 1 stop bit, no parity,
no flow control. The F2 key functions as a Delete key on VT-100 emulators.
To terminal or PC
No. Pin
1 Tip
2 Ring
3 Sleeve
IMC-574I-SFP User Manual

Figure 2.8 Serial Console Cable

DB9-F Pin# Signal Name
2 Transmit
3 Receive
5 Return
12
1 2 3
To console port
Direction
Out of Unit
In to Unit
Return