Installing The Ise Software; Redeeming The Software And Ip License - Xilinx Spartan-6 FPGA SP605 Getting Started

At this point, the user should have seen the board powering on, and that features like the
UART, switches, LEDs, flash, memories, and ethernet are passing their diagnostic tests. If
problems occur, turn to the

Installing the ISE Software

The SP605 evaluation kit includes entitlement to a seat that permits the
ISE Design Suite: Logic Edition to be used with a Spartan-6 XC6SLX45T FPGA. This
software can be installed from the DVD provided with the kit. The latest version can also
be downloaded from http://www.xilinx.com/support/download/index.htm.
The SP605 evaluation kit also works with the software listed here:
•
•
•
Update the software before working with the evaluation kit. Updates can be downloaded
from
To install the ISE Design Suite: Logic Edition software from the DVD included with the
SP605 evaluation kit:
1.
2.
3.

Redeeming the Software and IP License

A software voucher similar to the example shown in
SP605 evaluation kit. The voucher contains the code that is used to create a device-locked
software license for the ISE software and/or the IP included with the evaluation kit.
X-Ref Target - Figure 1-21
Spartan-6/SP605 Getting Started Guide
UG525 (v1.3) March 29, 2011
"Getting Additional Help and Support"
ISE Design Suite: Embedded Edition
ISE Design Suite: DSP Edition
ISE Design Suite: System Edition
http://www.xilinx.com/support/download/index.htm
Activate the software license. See
Insert the DVD provided with the SP605 evaluation kit in the host computer's drive.
Follow the instructions provided by the installation software.
Figure 1-21: Software Voucher
www.xilinx.com
Installing the ISE Software
"Redeeming the Software and IP License."
Figure 1-21
section of this guide.
is included with each
UG525_21_102610
23