2: Adding A Module; 3: Deleting A Module; 4: View Module List - Honeywell 6820 Manual

Modules
Editing Module ID
6. Press the up or down arrow key to modify the module ID.
NOTE: You cannot edit the module ID for any internal devices, or the SK-NIC.
Naming Modules
You can assign an English name to a system hardware module to make it easier to recognize on a display.
7. If you wish to edit the module's name, press ENTER on the module's name. Then, press the number keys corresponding to the character
for the module's, name (or press right arrow key to bypass editing the name).
NOTE: See Appendix A for editing names.
.
Changing Module Options
Each module has a unique set of options that specifically applies to the functionality of the module being edited.
8. Use the left and right arrow keys to move between available options.
9. Option settings are edited by pressing the up or down arrow key or using the keypad for numerical entry.
8.2.2 Adding a Module
If you need to add a new hardware module to the system, follow these steps.
1. Login to the panel.
2. Select 7 for Program Menu.
3. Press 1 to enter Module Menu.
4. Press 2 to add a module.
5. From the next screen, use the up or down arrow to choose a module type to add from the <New Module Type> screen.
The screen will display "Adding module [#]..." for a few moments. You will be returned to the <New Module Type> screen where you
can add additional modules if desired.
You must save changes when you exit the Program Menu or the new module will not be added.
NOTE: If you add a module that has not been physically connected, the panel will go into trouble after it reinitializes (when you exit the
Program Menu). When the new module is attached, the trouble will correct itself automatically.
8.2.3 Deleting a Module
To delete a module, follow these steps:
You must be in the Main Menu to perform this task. If necessary, login to the panel.
1. Select 7 for Panel Programming.
2. Press 1 to enter module menu.
3. Select the desired module.
4. Press 3 to delete a module.
5. Select the module to be deleted.
6. A warning screen will display. If you want to proceed with deleting the module, select Yes. To cancel, select No.
8.2.4 View Module List
To view a list of all modules, follow these steps:
You must be in the Main Menu to perform this task.
1. Login to the panel.
2. Select 7 for Panel Programming.
3. Press 1 to enter module menu.
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
Default name for 5880 module
(no customization)
Use arrow keys to select characters.
Letters begin displaying with "A". Press
the ENTER key to select the desired
character. Use the right arrow to move
to the next character.
Figure 8.1 Edit Module Name Programming Screen Example
5880-LED I/O
Module ID: 03
5880 03_________
<Module Name>
5880-LED I/O
AB_____________
Programming
91