System Options; 1: Communication Options - Honeywell 6820 Manual

Programming
Choices Type Selections
EVSRVM, EVSVCM UNUSED
SWITCH

8.6 System Options

This section of the manual explains how to customize software options that affect general operation of the system. This includes such items
as: Communication Options, Time Options, Miscellaneous Options, Daylight Saving Options, Edit Banner, and SLC Family. Refer to each
individual subsection for complete instructions.
8.6.1 Communication Options
Auto Test Time
To access the Auto Test Time screen:
1. Login to the panel. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Select 5 for System Options.
4. From the next menu, select 1 for Communication Options.
5. Select 1 for Auto Test Time.
6. Enter the hour you desire the control panel to send an automatic test report (or press the up or down arrow key), then press ENTER.
7. Enter the minutes (or press the up or down arrow key), then press ENTER.
8. Select AM or PM by pressing the up or down arrow key, then press ENTER.
9. Select Report Time Interval by pressing the up or down arrow key, then press ENTER. Time Interval selections are 24hr, 12hr, 6hr and
4 hr.
NOTE: AM and PM are only available if the panel "Clock Options" are set for AMPM mode. Otherwise the clock is in military time and AMPM is
not selectable
Phone Lines
To access the phone lines screen:
1. Login to the panel. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Select 5 for System Options.
4. From the next menu, select 1 for Communication Options.
5. Select 2 for the phone Lines.
104
Function Selections for
each Type
MANUAL PULL
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
EVS INPUT
EVS TAMPER
EVS SUPERVISORY
VOICE AUX STATUS 1-2
BACKGROUND MUSIC
VOICE AUX ECS 1-4
Table 8.7 Choices for Point Programming Modules (Continued)
Refer to comments column of
Table 8.5 for description of these options.
Latch or Non-latching feature only appears for WATERFLOW, FIRE
SUPERVISORY, FIRE TAMPER, ZONE AUX1, ZONE AUX2, SYSTEM
AUX1, SYSTEM AUX2, EVS INPUT, EVS TAMPER, and EVS
SUPERVISORY
User also has ECS Event Number 1-8 option for EVS INPUT, EVS
TAMPER, and EVS SUPERVISORY functions in both 5880 and EVS-
VCM/EVSRVM choices.
Only available when an EVS-VCM is installed in the system to the
EVSRVM choice part.
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
System Options
Comments