Setting Keyboard Options - Epson ActionPC 2000 User Manual

If you installed an optional video card, follow the guidelines
below to select the correct adapter type.
Video display type options
Select
EGA/VGA
CGA40*
CGA80*
MONO*
* For these options, you must change jumpers J1 and J2 on the system board
to the OFF position. See Chapter 3 for information on setting jumpers

Setting Keyboard Options

Two options in SETUP allow you to control keyboard settings.
The Keyboard option allows you to disable the built-in
keyboard connector.
NumLock on at boot option determines the initial state of
The
the Num Lock function when you turn on or reset your system.
When Num Lock is off, the keypad controls cursor movement.
If Num Lock is on, the keypad types numbers.
Select
YES
NO
starts or
If
You connected your monitor to the built-in VGA port or you
installed a VGA or enhanced graphics adapter (EGA) card
You installed an optional color graphics adapter set to
40-column color graphics adapter (CGA) mode
You installed a CGA or a multi-mode graphicsadapter
(MGA) attached to a color monitor
You installed a monochrome display adapter or an MGA
attached to a monochrome monitor
to set the Num Lock function on when the system
to leave it off.
Setting Up Your System
1-15