Table of Contents
Advertisement
USING YOUR IMAGES
Use your AV cable to connect the camera to video display devices.
Make sure the power is turned off before you begin.
Open the connector cover carefully, to avoid damaging it.
Open the connector cover and connect the AV cable from the camera
to the TV.
Be sure the "Video-out" setting matches your country's TV technical standard. It has been set to
NTSC (the Japanese standard) at the factory.
(To change the setting see page 95.)
EXPORTING IMAGES TO A COMPUTER
How to copy your images directly to your computer.
Make sure the power is turned off before you begin.
Open the connector cover carefully, to avoid damaging it.
Open the connector cover and connect the PC cable from the camera
to the computer.
38
DISPLAYING ON A TV
Sound - White Jack
Video - Yellow Jack
D e p e n d i n g o n t h e O S
o f y o u r c o m p u t e r , y o u
may have to install driver
software. The driver software
can be found on the CD-
ROM that is included. For
more instructions, refer
t o y o u r D i g i t a l C a m e r a
Software Guide.
Advertisement
Table of Contents
