Pulse Interface For Multical 41 - Kamstrup MULTICAL 41 Technical Description

TECHNICAL DESCRIPTION
12.2 Pulse Interface for MULTICAL
When the meter is in testing mode, Pulse Interface type 66-99-109 can be used during verification on the test rigs
with pulse interface.
The pulse output on the terminals 6-7-8 cannot be used for testing MULTICAL
3.5-30 VDC < 5 mA
Supply:
< 1 mA
Stand-by:
< 30 V < 15 mA
Pulse:
Pulse duration: 50% Duty cycle or pulse < 0.1 sec.
Meter size
MC 41
Q3: 1.6
38
®
41
Figure 28
Volume (pulses/litres)
MC 41
100
5512-313 GB/01.2010/Rev. C1
MULTICAL
®
41.
®
41