Dallas Semiconductor MAXIM DS3112 Manual page 36

Register Name:
Register Description:
Register Address:
Bit # 7
Name —
Default —
Bit # 15
Name —
Default —
Note: Bits that are underlined are read-only; all other bits are read-write.
Bit 0: HTCLK Invert Enable (HTCLKI).
0 = do not invert the HTCLK signal (normal mode)
1 = invert the HTCLK signal (inverted mode)
Bit 1: HTPOS/HTNEG Invert Enable (HTDATI).
0 = do not invert the HTPOS and HTNEG signals (normal mode)
1 = invert the HTPOS and HTNEG signals (inverted mode)
Bit 2: HRCLK Invert Enable (HRCLKI).
0 = do not invert the HRCLK signal (normal mode)
1 = invert the HRCLK signal (inverted mode)
Bit 3: HRPOS/HRNEG Invert Enable (HTDATI).
0 = do not invert the HRPOS and HRNEG signals (normal mode)
1 = invert the HRPOS and HRNEG signals (inverted mode)
Bit 4: HTPOS/HTNEG Force High Disable (HTDATH). Note that this bit must be set by the host in order for
T3/E3 traffic to be output from the device.
0 = force the HTPOS and HTNEG signals high (force high mode)
1 = allow normal transmit data to appear at the HTPOS and HTNEG signals (normal mode)
Bit 5: HTPOS/HTNEG Force Low Enable (HTDATL).
0 = allow normal transmit data to appear at the HTPOS and HTNEG signals (normal mode)
1 = force the HTPOS and HTNEG signals low (force low mode)
Bit 8: LTCLK Invert Enable (LTCLKI).
0 = do not invert the LTCLK[n], LTCLKA, LTCLKB, and LTCCLK signals (normal mode)
1 = invert the LTCLK[n], LTCLKA, LTCLKB, and LTCCLK signals (inverted mode)
Bit 9: LTDAT Invert Enable (LTDATI).
0 = do not invert the LTDAT[n], LTDATA and LTDATB signals (normal mode)
1 = invert the LTDAT[n], LTDATA and LTDATB signals (inverted mode)
Bit 10: LRCLK Invert Enable (LRCLKI).
0 = do not invert the LRCLK[n], LRCLKA, LRCLKB, and LRCCLK signals (normal mode)
1 = invert the LRCLK[n], LRCLKA, LRCLKB, and LRCCLK signals (inverted mode)
Bit 11: LRDAT Invert Enable (LRDATI).
0 = do not invert the LRDAT[n], LRDATA and LRDATB signals (normal mode)
1 = invert the LRDAT[n], LRDATA and LRDATB signals (inverted mode)
MC2
Master Configuration Register 2
04h
6 5
— HTDATL HTDATH
— 0
14 13
— —
— —
4 3
HRDATI
0 0
12 11
— LRDATI
— 0
36 of 133
2 1
HRCLKI HTDATI
0 0
10 9
LRCLKI LTDATI
0 0
DS3112
0
HTCLKI
0
8
LTCLKI
0