Table of Contents
Advertisement
D-Guard² Instruction Manual
18.6 Sensor Gain
You can select a sensor type from the Sensor Presets menu, see
sensor gain is automatically set.
You can adjust the sensor gain to compensate for differences between sensors of the
same type or to change the full scale value for a sensor.
Access the Sensor Settings Menu. See
Step 1. Use
to exit or
Step 3. Use
to return to the settings menu.
CAUTION: The sensor gain and the full scale value effect each other. If you try to set the
gain too high the D-Guard² will show you.
Figure 17. Sensor gain warning
30
section
to set suppression.
section
18.1.
Step 2. Use
to adjust then
Step 4. Use
to go back or
21.6, the
to apply.
to continue.
Item Number 201018
Advertisement
Table of Contents
