Table of Contents
Advertisement
D-Guard² Instruction Manual
1 Introduction
The D-Guard² general purpose is a single gas fixed detector with a large range of
available sensors and an easy to use interface.
Figure 1. D-Guard² .
2 Method of Operation
The D-Guard² detects toxic or flammable gas and can interface with external
equipment to trigger alarms or operate additional equipment. The D-Guard² can be
fitted with an oxygen sensor to measure the oxygen concentration in the environment.
The D-Guard² detects gas via diffusion to the sensor at normal atmospheric pressure.
3 For Your Safety
WARNING: You must obey the instructions for the safe installation, use, and
maintenance of this equipment.
NOTE: Modification of this equipment is strictly prohibited without written permission from
Gastech Australia Pty Ltd.
4 Further Information
Please tell us if you want help with this equipment.
Head Office: Gastech, 24 Baretta Road, Wangara, WA 6065, Australia.
Phone: +61 8 6108 0000 Email: info@gastech.com Website: gastech.com
2
Item Number 201018
Advertisement
Table of Contents
