Table of Contents
Advertisement
D-Guard² Instruction Manual
18.3 Set Span Gas Concentration
Access the Sensor Settings Menu. See
Step 1. Use
to exit or
Step 3. Use
to return to the settings menu.
CAUTION: The span gas must be less than or equal to the full scale range. If you try to set
the span gas concentration higher the D-Guard² will show you.
Figure 15. Span Gas Concentration Warning.
27
section
to set the span gas.
18.1.
Step 2. Use
to adjust then
Step 4. Use
to go back or
to save.
continue.
Item Number 201018
Advertisement
Table of Contents
