Table of Contents
Advertisement
D-Guard² Instruction Manual
19.4 Alarm Relay state
CAUTION: The D-Guard² general version does not have internal relays. You must ignore this
section.
The D-Guard2 Relay and Siren versions have two user configurable relay outputs.
You can adjust the initial state of the alarm relays. The options are de-energised or
energised.
The D-Guard² has an additional fault relay. This is not user configurable.
Access the Alarm Settings Menu. See
Step 1. Use
to go back or
Step 3. Use
to got into the relay menu.
Step 5. Use
to go back or
34
section
19.1.
to continue.
Step 2. Use
Step 4. Use
to continue.
to highlight the level menu.
then
to apply.
Item Number 201018
Advertisement
Table of Contents
