Table of Contents
Advertisement
D-Guard² Instruction Manual
18.2 Set Detector Full Scale
Access the Sensor Settings Menu. See
Step 1. Use
to go into the full scale menu.
NOTE: The full scale reading cannot be greater than the range of the fitted sensor.
Step 3. Use
to return to the settings menu.
CAUTION: You must adjust the sensor gain if the maximum measurable signal error occurs.
Figure 14. Sensor Gain Warning.
26
section
18.1.
Step 2. Use
Step 4. Use
to adjust then
to save.
to go back or
continue.
Item Number 201018
Advertisement
Table of Contents
