Table of Contents
Advertisement
D-Guard² Instruction Manual
21.3 4-20mA Output Test
You can test the D-Guard² 4-20mA current loop output.
Access the Advanced Settings menu. See
Step 1. Use
to go into the advanced menu.
Step 3. Use
to go into the system tests.
Step 5. Use
to change or
CAUTION: You must check external equipment before the output is tested. Failure to do so
may trigger external control systems.
43
section
21.1.
Step 2. Use
Step 4. Use
to cancel.
to highlight system tests.
to go into the 4-20mA test.
Item Number 201018
Advertisement
Table of Contents
