Table of Contents
Advertisement
D-Guard² Instruction Manual
20.4 Disable Passcode
You can disable the D-Guard² passcode. The passcode limits access to the
configuration and operation of the D-Guard².
Access the System Settings menu. See
Step 1. Use
to go into the passcode menu.
Step 3. Use
to go into the passcode menu.
CAUTION. If you forget the passcode, you must return the D-Guard² to a Gastech Service
Centre.
40
section
20.1.
Step 2. Use
Step 4. Use
to highlight the system menu.
to cancel or
to apply.
Item Number 201018
Advertisement
Table of Contents
